PCD CYLINDERS, PISTONS BACKING PLATES
Introduction:
Our PCD diamond cylinders are developed to have a gain in signal for neutron measurements. The absorption lengths are much lower than comparable PCD diamond of other manufacturers. We can supply you PCD cylinders according to your drawing for use in the Paris/Edingborough cell or as a backing plate for your high pressure diamond cell.
Properties of PCD material
| Volume of diamond | 80% |
| Bindermaterial | Silicon |
| Mechanical properties | |
| - Density (g/cc) | 3,38 - 3,41 |
| - Stiffness (Elastic Modulus (GPa)) | 1.050 |
| - Strength (Transverse Rupture Strength (GPa)) | 0,65 |
| - Hardness (Knoop Hardness (3kg load) (kg/mm²)) | 4.000 |
| - Heat Transfer (Thermal Conductivity (W/mK)) | 350 |
| - Fracture Toughness (Notched Beam (Mpa*m1/2): | 4 |
| Maximum available sizes | |
| - Cylindrical | Ø 35 mm x 35 mm |
| - Rectangular | 25 mm x 25 mm x 35 mm |
| - Cubic | 25 mm x 25 mm x 25 mm |
|
X ranges from: 1.50 upto 35 mm H ranges from: 1.00 upto 35 mm |
 |
Choose selections
-
Holes
If you can send us a drawing of the required dimensions, we can check this. - Cones
Pistons with a cone or fully cones are feasible. If you can send us a drawing of the required dimensions, we can check this.